Products Description
Brief introduction about ANF 1770 010 Galvanized Preformed Teminations Pole Top
1) Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.
2) We are the manufcturer with ten years experience of various preformed Cable Fitting for ADSS/OPGW. galvanized steel line hardware used to link clamps to insulator, or to link insulator and ground wire clamp to tower or sujection stucture. various prefored Cable Fitting for ADSS/OPGW special type inaccordance with mounting condition.There will no sharp edges, and corners rounded. All galvanized steel line hardware will be clean rust free, smooth and uniform throughout and will also be free from burrs.various prefored Cable Fitting for ADSS/OPGWhas high tensile strength. It is straight and uniform.And it passed ISO9001.
3) We also can supply grounding piece according to your request.
Direction of Pole Top Make Off Distribution Grip Deadends:
1. It is designed to connect Continue pole (or tower) and Terminal pole (tower), tensile pole (tower) .The special specification: one unit per Terminal pole (tower), two units per tensile pole (tower) and two units per Continue pole (tower).
2. Select the Specification Model corresponding to the cable diameter range, Rated Tensile Strength.
3. Ground Clamps are sold together with Tension Sets, and prohibited directly installing on the Outer Reinforcing Rods and Inner Protection Rods.
Specification
Data Sheet about Pole Top Make Off Distribution Grip Deadends:
Specification | Cable Diameter | Inner Protection Rods | Outer Reinforcing Rods | Color Code | ||
Length(mm) | Quantity | Length(mm) | Quantity | |||
ONF 1000 070 | 9.0-10.0 | 1350 | 13 | 900 | 6 | red |
ONF 1110 070 | 10.1-11.1 | 1350 | 15 | 900 | 6 | orange |
ONF 1220 070 | 11.2-12.2 | 1400 | 14 | 1000 | 7 | yellow |
ONF 1330 070 | 12.3-13.3 | 1400 | 15 | 1000 | 7 | green |
ONF 1440 070 | 13.4-14.4 | 1400 | 16 | 1000 | 7 | cyan |
ONF 1550 070 | 14.5-15.5 | 1700 | 17 | 1200 | 8 | blue |
ONF 1660 070 | 15.6-16.6 | 1700 | 18 | 1200 | 8 | purple |
One set of Tension Set includes a unit of Inner Protection Rods, a unit of Outer Reinforcing Rods,two Anchor Shackle (U-7), a Parallel Plate (PD-7) and a Clevis Thimble (NHG-070) and one set of ground clamp.
Structure and Raw Material of Pole Top Make Off Distribution Grip Deadends:
Anchor Shackle: Hot dipped galvanized steel. Anchor Shackle is connected with fastener clamp on tensile pole (or tower).
Parallel Plate: Hot dipped galvanized steel. Parallel Plate is connected Anchor Shackle and Clevis Thimble.
Clevis Thimble: Hot galvanized cast steel. Clevis Thimble is plugged in bend of Outer Reinforcing Rods for protection and connected.
Inner Protection Rods: Inner Protection Rods are made of aluminium clad steel rods. With a layer of particle emery inside, Inner Protection Rods can increase friction and decrease side pressure to cables. Rods are made into four subsets which can reduce misalignment errors and speeds installation. The ends are bent outward to avoid stress to OPGW cables.
Outer Reinforcing Rods: Rods are made into one subset with a layer of firm emery inside, in order to increase gripping power of Outer Reinforcing Rods while decreasing side pressure. Sets are color marked to reduce misalignment errors and to speed installation.
Ground Clamp: Ground Clamp is designed to connect OPGW cable with ground providing close circuit for short circuit current.
Packing&Delivery
Cooperative Client
Our cooperative client are all over the world and our products are very popular all over the world. Many products are exported to Russia, USA, Australia, Canada, South Africa, Kenya, Tanzania, Zambia, Brazil and Argentina. Chile, Southeast Asian countries and other international markets. With first-class technical ability and perfect pre-sale and after-sales service guarantee system, we have established a good reputation between enterprises and users.
FAQ
Q: Do you provide sample service?
A: Yes, we only provide samples and ask for one piece at a time. The freight should be borne by you.
Q: Do you support customized services？
A: Yes, we can customize the size and logo according to your needs. Please consult the customer service for the specific minimum order quantity.
Q: How is the Design & Engineering?
A: Experienced and skilled team of designers including CAD designers and 3D designers has the capacity to deliver outstanding designs for your project. If you require more complex engineering of structures such as overhead transmission and distribution lines design,we can also provide this service also designer fee .
Q: What's the payment term?
A: We accept T/T, L/C, West Union.
Q: What's the delivery time?
A: Usually within 7-15 days according to quantities
Q: What's the standard of package?
A: Export standard package or special package as the requirement of customers.
Q: What kind of product quality your factory offer?
A: Our products with both excellent quality and competitive price. And we offer free sample for your reference.
Q: What kind of certificate you have?
A: We have ISO9001:2008
